全部产品
进店逛逛
品牌型号： 马来西亚， SX105 产地：马来西亚 包装规格：25KG/包
| 均聚物 | 熔滴点 | 加热损耗（%)105℃ 3小时（%）200“C*1h
| 密度 g/cm3@25℃ | 粘度cps @140℃ | 分量子 | 形态 |
| 110±5℃ | K0.2 s3.0 | 0.91-0.95 | 500±50 | 5000-6000 | 粉末 |
用途：
| 应用领域 | 主要功能 | 建议用量 |
. 塑料
| 作为热塑性塑料的内外润滑剂，提高PVC,PE,PP, ABS 的流动性，提高PMMA，PC的脱模效果.
| 剂量为0.5-2% |
| . 塑料 母粒 | 用于聚烯烃，ABS，PS,工程塑料等色母粒， 填充母粒的分散剂
| 剂量为2-25% |
| . 其他用途 | 作为橡胶中的润滑和分散剂， PE蜡作为聚丙烯用化纤母粒的分散剂 PET: 提高粉末涂料中的粉末流动剂 用于涂料 印刷油墨 作为热熔胶粘剂和道路标线涂料的分散剂。 | 剂量为0.5-2% |
USES:
Recommended usage for main functions in application area
The plastic
As the internal and external lubricant of thermoplastic plastics, improve PVC,PE,PP, ABS
The fluidity, improve PMMA, PC demoulding effect.
The recommended dose is 0.5-2%
.Plastic masterbatch
For polyolefin, ABS, PS, engineering plastics and other color masterbatches,
A dispersant to fill the masterbatch
The recommended dose is 2-25%
. Other USES
As a lubricant and dispersant in rubber,
PE wax as a dispersing agent PET of chemical fiber masterbatch for polypropylene:
Improve powder fluidity in powder coatings
Used for paint printing inks
As a hot melt adhesive and road marking paint dispersant.
The recommended dose is 0.5-2%
应用于：胶粘剂、油墨、纸涂料、地板抛光剂、橡胶、塑料、个人护理用品、涂料、蜡混合品.
应用于各种塑料的挤出、注射、延压及吹膜、吹塑，是理想的外润滑剂；有提高外润滑和脱模效果，不影响制品之维卡热变温度及抗冲强度;能提高产品挤出的速率，使制品表面保持光泽； 可延迟摩擦热的积聚，从而提高在高温下的热稳定性；有良好的电学特性，可用于树脂电线及电缆。
Application: adhesives, inks, paper paints, floor polishes, rubber, plastics, personal care products, paints, wax blends.
It is used in extrusion, injection, pressing, film blowing and blow molding of all kinds of plastics. It is an ideal external lubricant. It can improve the effect of external lubrication and demodulation without affecting the thermal variation temperature and impact strength of the product. Can improve the extrusion rate of the product, so that the surface of the product to maintain luster; The accumulation of frictional heat can be delayed to improve the thermal stability at high temperature. Good electrical properties, can be used for resin wire and cable.
